Rapid Racer Products ProGuard Front
- Trustpilot rating 4.7/5
- Easy returns
Ask a question about this product
Email Customer ServiceDescription
Description
Rapid Racer Products sizing: Standard
Technology
This mudguard is attached to the front suspension bridge and is therefore not suitable for MTBs without front fork suspension.Assembly
Securing the mudguard:1. Slide the mudguard into position near the front wheel
2. Hold the mudguard in position and make sure the tire has equal clearance on both sides
3. Now you can see which mounting holes are best for you to use
4. Remove the mudguard again and now press out the correct mounting holes
5. Tip: Place tape where the mudguard meets the front fork to prevent damage
6. Pass the tie-wrap through the mudguard and check the position again
7. Now pull the tie-wraps as tight as possible. Remember: a tight tie-wrap won't damage your fork, a loose one will!
8. Cut off the remaining ends
9. Before use, check whether the mudguard does not touch the frame when the front fork is compressed
Reviews
Reviews
Most recent reviews
5 / 5
Beautiful product that fits perfectly
The mudguard closes nicely and, in addition to providing good protection, gives a cool look to your bike.
Pros & Cons
5 / 5
Sleek appearance and solid material and easy assembly
A wide tight neat protector easy to mount and fits the bike well
Pros & Cons
4 / 5
Great product at the right price
You hardly notice there is a fender on it
Pros & Cons
5 / 5
Sturdy and fine front wing!
I have had this proguard for several months and am very happy with the quality and how it looks. Now ordering a 2nd one for the 2nd bike. This guard protects much better than the shorter variants in mud, and in dry weather also stops small stones. We had also recently been to a bike park with chair ice lift, where you hang the bike on the wheel. There, the guard just seems to sit against the clamp, but it actually went fine. I didn't have to take the guard off or worry about it breaking. The guard is really strong. All in all, I am very satisfied with it, and will definitely recommend it.
Pros & Cons
5 / 5
Good product
Sits super sturdy and keeps mud splashes out of your mouth
Pros & Cons
5
Sturdy and fine front wing!
I have had this proguard for several months and am very happy with the quality and how it looks. Now ordering a 2nd one for the 2nd bike. This guard protects much better than the shorter variants in mud, and in dry weather also stops small stones. We had also recently been to a bike park with chair ice lift, where you hang the bike on the wheel. There, the guard just seems to sit against the clamp, but it actually went fine. I didn't have to take the guard off or worry about it breaking. The guard is really strong. All in all, I am very satisfied with it, and will definitely recommend it.
-
Good quality
-
Looks nice on the bike
-
Strong material
Related products
Related products
Rapid Racer Products ProGuard Front | SKS Mudrocker Front | SKS Flap Guard | Ass-Savers Mudder | |
12 reviews | 22 reviews | 27 reviews | 25 reviews | |
Mudguard category | Front | Front | Front | Front |
Mudguard intended use | Mountain bike | Mountain bike | Mountain bike | Mountain bike / Cyclocross / Gravelbikes |
Fixed Mudguard Mount | Yes | Yes / No | Yes | Yes |
Mounting Position | Fork | Fork | Fork | Fork |
Maximum tyre width | 75 mm | 75 mm | 66 mm | |
Suitable wheel size | 26 inch (650c) / 27,5 (650b) / 29 inch | 27,5 (650b) / 29 inch | 26 inch (650c) / 27,5 (650b) / 28 (700c) / 29 inch | 26 inch (650c) / 27,5 (650b) / 28 (700c) / 29 inch |
From 33.53 | 25.36 | 9.10 | 9.15 | |
This product | View product | View product | View product |